Click here to Download as PDF Application Instructions Brush on Cinema Secrets Spirit Gum to the back of any area where the Stage Warts is touching the skin. Cinema Secrets Spirit Gum may also be applied directly to the skin, especially on larger pieces. Hold the appliance against the skin to determine proper placement. Although most of the appliances can be worn in several places, it is best to check for proper alignment of some pieces. Edges may be trimmed for a better fit. Position the Stage Warts onto your skin in the desired area and press into place. For best adhesion, remove the Stage Warts and use the piece itself or your index finger to tack the Spirit Gum with a rapid up and down motion. This will cause the Spirit Gum to become extremely tacky. Then Firmly press the piece back into place. Suggestions for a more Professional Look For thinner edges, after applying the Stage Warts to your skin with Cinema Secrets Spirit Gum, the edges of the Stage Warts may be stippled, using a small piece of White Latex Sponge with a thin coat of Cinema Secrets Flesh Latex. Allow this to dry before applying a second coat. A hair dryer set on low will help speed up the drying time. Powder the dried latex when finished.
After the adhering the Stage Warts, you may want to make your piece blend in better. To do this you will need the Cinema Secrets Flesh Stack, Castor Sealor, and Colorless Powder. Begin by tearing a White Latex Sponge in half, and using the rough side of the sponge, place a small amount of Castor Sealor on the sponge. Dip the sponge into the color that comes closest to matching your skin tone. Apply makeup to Stage Warts in a patting or stippling motion. Next, using the next darker makeup color, shade the Stage Warts in the appropriate areas. Lastly, using the lightest of the makeup colors, apply the makeup to the highpoints of the Stage Warts. Finally, powder the Stage Warts using Colorless Powder to set the makeup.
Removal Using a small brush or cotton swab, work a small amount of Cinema Secrets Makeup & Adhesive Remover under the edges of the Stage Warts. Be careful when working around the eyes, to not get any remover or blood in the eyes. Once removed, remove any residual adhesive/makeup by rubbing more remover into the area. Rinse the skin using a towel and warm water. For additional applications, clean the Stage Warts with soap and water and a small amount of alcohol. Let dry and store out of the damaging rays of direct sunlight.
